| Four 'state of the art' ultra low impedance, low
noise wide-band voltage regulator circuits are employed to power
both channels and are largely responsible for the high sonic performance
of the Diablo.
The non-ferrous cabinetry is made of aluminium, a design that
reduces Eddy current propagation that can affect sound reproduction
dramatically.
Three versions of power supply are available for the Diablo including
a 'Never Connected' version.
Specifications for Dino Phono Stage
Stereo Phono Amplifier for Moving Coil and Moving Magnet Cartridges.
Fully Passive RIAA equalisation between two active gain stages.
Cartridge loading resistance: 33 ohms,
100 ohms,
1k ohms,
47K ohms
--------------------------------------------------------------------------------
Cartridge loading MC 1.1nF
Capacitance: MM 100pF
--------------------------------------------------------------------------------
Switch selectable gain: MC Very Low Output 0.1 - 0.25mV 74dB
MC Low Output 0.25 - 0.4mV 70dB
MC Normal Output 0.4 - 0.6mV 63dB
MM Low Output 2 - 3mV 52dB
MM High Output 3 - 5mV 48dB
--------------------------------------------------------------------------------
Can be powered from either AC or DC power supply:
--------------------------------------------------------------------------------
AC Supply requirements: 0 - 17 Volts, 0 - 17 Volts
DC Supply requirements: 0 - 22 Volts, 0 - 22 Volts
--------------------------------------------------------------------------------
Two ultra high performance 'Super Regulators'
--------------------------------------------------------------------------------
RIAA reproduction characteristics: 20Hz - 20KHz +/-0.25dB
--------------------------------------------------------------------------------
Dimensions: 130mm x 58mm x 112mm (D x H x W)
--------------------------------------------------------------------------------
|