
Creek OBH-22 Passive
UK Retail : £300.00
Non EEC Retail : £255.32

| Input Impedance |
< 20k Ohm |
| Output Impedance |
0 - 20k Ohm |
| Separation |
> 80 dB's @ 1kHz |
| Attenuation |
0 - 90 dB's |
| Inputs |
3 Stereo pairs, inc Tape |
| Outputs |
2 Stereo pairs, 1 fixed, 1 variable |
| Relay Muting Factor |
> 90dB's |
| Weight |
6.1Kg |
| Size |
L/W/H 150 x 100 x 66mm |
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
General Information
Creek’s latest product release is the OBH-22 passive pre-amplifier.
The OBH-22 consists of a high quality motorised volume potentiometer,
and two stereo relays which select the desired input plus tape output,
together with a muting relay that can short the signals to ground.
A built-in micro-controller decodes the infra-red signals transmitted
by the handset and translates them into commands which activate
the motorised potentiometer and the muting and input selection relays.
After each operation, the micro-controller turns itself off to
avoid any possibility of interfering with the main music signal.
LED’s are used to indicate the status and mode of operation.
The OBH-22 is purely passive and does not introduce any gain or
distortion into the signal path. It is therefore suitable to be
used as a control pre-amplifier, provided the sensitivity of the
power amplifier that is being used is high enough to be driven directly
from the source. i.e. CD player or tuner etc.
The volume control can be operated manually at any time, whether
the OBH-22 is powered or not, but without power only Line 1 can
be utilised. |